Organic bentonite for Oil Well

Organic bentonite has been used in drilling mud fluids for many years. Especially in some ultra-deep wells, geothermal wells and high-pressure formations, conventional organic bentonite used in drilling fluids, often faced with the collapse of the colloidal structure of the reasons, mainly because of the dramatic increase in water loss, and the loss of control of rheology will lead to the collapse of the well wall, the stability of the decline, and at the same time, we are faced with repeated slurry distribution, which will increase the cost of the delay in the drilling cycle. When the temperature at the bottom of the well exceeds 200℃, looking for an organic bentonite with high temperature stability will be an optimal solution. Our high temperature resistant organic bentonite, its quaternary ammonia salt modified layer spacing is greater than or equal to 4.2nm, while the conventional conventional organic bentonite is only between 2:30 ~ 3.5nm. At the same time, its compatibility advantage is very obvious, such as with sulfonated asphalt nano-blocking agent can have good compatibility. We have found through testing that high temperature organic bentonite has a positive effect in terms of high temperature suspending power, API filtration loss. If you submit your well depth, temperature and stratigraphic data to our technical department, our technical department will provide you with the recommended type, which will directly help you to avoid some problems, and we will also provide you with 500 grams of samples as a test to check its stability in high temperature drilling fluids.