Organoclay thixotropic type

Organoclay thixotropic type is a specialized material valued for its ability to exhibit reversible gel – sol behavior, and its effective use follows a specific set of procedures.

To utilize this thixotropic type, first, weigh a amount of organoclay and add it to the organic phase, then homogenize and disperse for 5 minutes. This initial dispersion step lays the foundation for its thixotropic properties.

Next, add the required activator (polar additive), such as propylene carbonate which is recommended, and continue homogenizing to form a homogeneous gel for later use.

When incorporating this gel into the desired system to mix with other formulations, the recommended addition amount in the system ranges from 0.25% to 3%, while the activator is suggested to be added at approximately 1% to 10%. These steps ensure the thixotropic type organoclay functions optimally in various applications.

Organoclay is the commercially available organically modified clay mineral used as a rheology modifier and anti-settling additive in oil-based systems including drilling fluids, solvent-based coatings, and lubricating greases; full product specifications are at organoclay — product specifications and application guide. The organophilic clay surface chemistry, dispersion method, and compatibility with different base oils and solvents are explained in organophilic clay — surface chemistry and industrial applications. To source organoclay directly from a China manufacturer, see organoclay supplier — factory-direct supply and technical support.