drilling lubricant
Drilling lubricant and organophilic clay are both use for oil drilling mud.Drilling lubricants is an excellent lubricant with the main components being aliphatic derivatives.
Organoclay is the primary rheology modifier for oil-based drilling mud, controlling yield point, gel strength, and barite suspension under high temperature and pressure; full technical specifications and HPHT performance data are at organoclay for oil well drilling — OBM rheology modifier specifications. Drilling fluid additive performance data, including fluid-loss control and viscosity profiles, are covered in organoclay for drilling fluids — yield point and viscosity control. To source drilling-grade organoclay directly from the manufacturer, see organoclay supplier — China factory direct for OBM drilling additives.
drilling lubricant
drilling lubricant
Specifications
This is a brown liquid with a slight odor. The surface of this product has adsorption capacity, so it is a good adsorbent and can be adsorbed on the surface of the drilling tool.
Improve the lubricity of drilling fluid, reduce its friction, reduce jamming ability, and improve the overall safety of drilling operations.
Physical appearance …………….……Light yellow to brown liquid
Density(g/cm3) …………………………………………….0.80-1.0
Density change increase. value(g/cm3) …………………… ≤±0.08
Apparent viscosity change value(mPa·s)……………………≤5
Lubrication coeff. reduction…………………………………… ≥70%
Concentration is very important for lubricants. Our normal range index is between 1~3%. If you have special requirements for the density of the mud, the coefficient system of the mud and the friction coefficient, these will affect the lubrication.
The main factor is agent concentration. After initially adjusting the concentration, we need to process and check its concentration regularly. Penetration rates, solids control equipment and dilution rates are all factors that directly impact lubricant treatment levels and products.
The lubricant we use for drilling can match the usual water-based mud and is a relatively low fluorescence additive.
It is suitable for use in various water-based drilling fluids. It has a very obvious effect on directional wells, horizontal wells and drilling operations such as casing for various types of wells. You can directly use it into the drilling fluid. The amount we recommend you use is Between 1% and 2.5%, please obtain the final data through experiments.
The product is usually packaged in 55-gallon drums, and other packages are available upon request.
Store product in a cool, dry and well-ventilated area.
The main purpose of using lubricants in drilling fluid is to reduce the torque occupied and delay its wear and fatigue, thereby extending the service life of the drill bit bearings. Therefore, after using lubricants, the drill bits used in the drilling fluid and drilling tools, its service life will be extended.
Using lubricant in the drilling fluid can also add its frictional resistance to shorten the downtime. When you use lubricant for drilling, it can choose to use less power to rotate the well, saving diesel and extending the service life of the equipment.
There is also a very obvious effect, which is that after using lubricant, it can prevent the drilling tool from sticking or the drill bit from getting muddy.
We choose different drilling lubricants in order to reduce its friction, based on the characteristics of the drilling tools.
The lubricant used in drilling creates friction between the lubricant and the well wall by forming an adsorption film on the surface of the rock occupying the well wall.
Drilling lubricants have good defoaming properties.
Toplight can be used for exploration logging and evaluation logging.
It is a good adsorbent with high efficiency, which can quickly reduce the friction between the drill bit and the formation. Cooling the drill bit can reduce the torque on the turntable.
It has excellent ability to adjust the rheological properties of high-density drilling fluids.
If you are looking for lubricants for drilling, please contact us now, we are willing to provide you with free samples and give you technical support and guidance.Thanks
