Organoclay Bentonite suspension

When you are in the production of paints, coatings, inks, grease or mud drilling fluids, whether you encounter a suspension problem, then suspension stability is a common goal in all industries and many manufacturers of organic bentonite clay is vague in providing the index of suspension stability, here we give the following information, hope it will help you.

As a professional organic bentonite manufacturer, we hope to solve the user’s pain points and core problems in a real sense. In the following content, we will solve the problems our users encounter when using organic bentonite clay from three aspects.

1), encountered when the product static stratification. Customers often complain that the product will be placed in the storage process will appear delamination and agglomeration, affecting the performance of the end product, especially some coatings and drilling fluids will appear in this case, but also includes grease and ink in the same will appear in these cases, then the test is not the case of the longer the better.

According to the scene should be we solve separately, for example, in the drilling mud fluid, the high temperature reaches 80 ℃, our Organic bentonite clay to ensure that within 4 hours without delamination, coating industry, then in 24 hours the delamination rate needs to be controlled within 5%. This is our industry standard.
If you encounter this situation, we suggest that you are to increase the amount of organic bentonite added, and then follow through with its delamination.
Most of the time our paint manufacturers or ink manufacturers focus on viscosity but neglect charge stability.
At the same time after mixing the recovery time is too long, resulting in reduced construction efficiency, which is what we need to go through the organic bentonite to solve the thixotropic recovery time is an important point, we can rotate the viscosity tester three times the shear cycle, the recovery of its time should be controlled within 10 seconds.

Of course, organic bentonite, in addition to solving the above thixotropy problem, the solution for the suspension is also very considerable.
drilling mud suspension